We’ve all been here

Robots and industrial machines are remarkably reliable. Unfortunately, when something goes wrong, there’s often quite a lot of finger-pointing. So I’m sure we’ve all been in a similar situation to this.

The difficulty is the system integrator, maintenance crew and production team can only see things from their own perspective: how the system is supposed to run, what work’s been done to it and how it appears day to day. They all have their own version of what a problem is caused by. None of them gets the full picture.

That’s part of the reason why we’ve developed RoboVigil. It gives everyone all the information from when something goes wrong. You have a camera shot and you have information direct from the robot or machine controller. The beauty of this is that not only can you see immediately what is going on, you can see whether somebody’s driven up, left a pump truck in the cell, or you can see that the gripper has fallen off the robot.

You can also see patterns very clearly, because if faults keep reoccurring, you can see the errors and you can see the causes. So, for example, I was speaking to someone recently about a system where the anti-spatter had been turned down, presumably to save a few pennies. The problem with this was that it was causing excessive spatter build-up, and therefore tip wear, whenever the tip was being automatically cleaned, because you’re just moving the weld spatter around, grinding down the weld tips. So for the integrator, that meant a long journey to go and work out and diagnose exactly what happened. With RoboVigil, they can see the changes in weld voltage and weld current. He said he’d be able to see from the weld current that the wire was getting stuck.

It is very hard to judge exactly what’s going on with a system until you can see all the data. So RoboVigil reads the machine data directly. So whatever is on the robot teach pendant can be shown in RoboVigil. This means that along with the live camera stream, you can very easily work out what the issue is, and you can work out who’s got to fix it. A pressed E-stop, an open safety circuit, a lack of gas pressure, all there along with whatever production data you need. Thankfully there is no long setup required, RoboVigil reads the configuration automatically and knows what data to present because we know robots.

The live camera stream and fault snapshots help with diagnosis in a way data alone cannot. Allowing you to see precisely what was happening when the fault occurred means there is no guesswork and less finger-pointing. The badly positioned pallet, the flexing gripper, the broken hose: all the real, messy causes of downtime are now caught – and can be put right.

RoboVigil is charged per machine, not per user, so everyone with a phone or a laptop can see what’s going on and get notified when something is wrong. RoboVigil also has easy to set up Teams and Slack integrations. We even have a virtual post-it note that you can add to a machine, so people can add their note to let other users know if there’s an issue, a question, or just something to be aware of.

Much like the meme, everyone’s on the same side and everyone wants the same thing. With RoboVigil, you can get the full picture, which allows you to ensure that good machines run even better. Got a machine where the finger-pointing has started? Get in touch, and we’ll show you what the full picture looks like.